ATM Hacking Tutorial

ATM Hacking Tutorial

“ENTER PASSWORD” will be displayed. Enter Master, Service or Operator Password.

  • Defaults: Master =555555
  • Service = 222222
  • Operator = 111111

#1- To access the Operator Function menu,

  • hold the <Cancel>, <Clear> and <Enter> keys simultaneously for 2 seconds,
  • release them and press 1,
  • then press 2,
  • then press 3.

The timing of this procedure can be difficult at first. Note: The Operator Function menu can only be accessed when the machine is either in service (“swipe your card” screen) or out of service.

If the machine is attempting to connect the host or initializing, you will not be able to use the key commands to access the Operator Function Menu. If you have trouble accessing the Operator Menu, power off the ATM and then either open the vault door or remove the paper from the printer and power back on. This will force the ATM to the Operator Menu.

2- Once you successfully completed the key combination, you will be prompted to enter a password. There are 3 options for passwords. · Operator Password (allows access to basic menu structure) ·

Service Password (allows access to basic and diagnostic menus) · Master Password (allows access to all menus including setup parameters) Passwords are very important to maintaining security for your ATM. Your dealer/distributor will provide you with default password information.

3- left is the complete Operator Function menu, depending on which password you entered (operators, service, master) you may not see certain functions. For example, if you use an operator password you will not see the Host Setup button, as you will not have access to that menu.
good luck.

Leave a Reply